Gutter Guards

Item Number: GG

Made in USA

Each 4 ft. length of rustproof aluminum alloy is stamped with thousands of 3/16" holes. These admit heavy rains but keep out leaves, twigs, nests and pinestraw. Each length comes with 3 plastic clips which snap guards securely in place onto 4" and 5" aluminum gutters.
Overall width of guards is 5-3/4". Rain dam on front edge restricts overflow. Made from .014 gauge corrosion resistant aluminum.
Barely visible from the ground, Leaves-Away gutter guards require no maintenance-yet save hours of cleaning time each season.
Leaves-Away gutter guards have been in use since 1984 and sold nationally since 1987 to thousands of satisfied users.

Each Pack includes 3 plastic clips per 4 ft length.
20 ft Pack-contains 5 x 4 ft lengths plus clips.
40 ft Pack-contains 10 x 4 ft lengths plus clips.
100 ft Pack-contains 25 x 4 ft lengths plus clips.
200 ft Pack-contains 50 x 4 ft lengths plus clips.
500 ft Pack-contains 125 x 4 ft lengths plus clips.

Extra 4 ft lengths and clips are sold separately.


Simple Installation
Shingle Overlap Installation:
Slide guards up under shingles. Pull down guards onto edge of gutter.
Flat Installation: Fold up back edge of gutter guard and lay it flat on top of gutter.

Rigid construction makes Leaves-Away installation simple. The easy to handle 4 ft lengths are shipped flat, so there is no unravelling to deal with, and no pre-measuring. When you reach the end of a run, you simply trim the excess with tinsnips or heavy scissors.
Write a Review
Gutter Guards - Service and Product
Jan 6, 2019 | R.J. Bloom, BCSI
Review star icon Review star icon Review star icon Review star icon Review star icon
Quality Product, quick service and great price. usually it's: "You can only pick 2".. got all 3!! Nice!!


Good product
Dec 18, 2018 | John Groff
Review star icon Review star icon Review star icon Review star icon Review star icon
I would tell others about your Gutter Guard


Great!
Sep 22, 2017 | RSRW
Review star icon Review star icon Review star icon Review star icon Review star icon
We have used these guards for several years. They work great for leaves and pine needles. They even stayed on through the installation of a new roof. I can't say enough good things about this product.


too thin
Dec 27, 2016 | Brian Park
Review star icon Review star icon Review star icon Review star icon Review star icon
Guards are nicely made, better then most, but are still way too thin gauge to withstand the elements, and they collapse into the gutter. They are too narrow (they don't reach under the shingles enough). They should either be made of thicker aluminum, or stainless steel, and be offered in wider widths. Why is it that the industry in general makes gutter guards so cheap and flimsy, when they are to become a permanent part of a building, and are so hard to access for replacement? These guards are better made then most, but still not good enough! I double them up, but still they are not strong enough. C'mon, Kimsman, aluminum is not that expensive! The next time, I will buy 1/16" thick punched aluminum stock, and cut it to (wider) width myself! The plastic clips are total folly, and fall out (perhaps they would fit into cheap narrow gutters?) I drop deck screws into the holes after fitting them, against the inside edge of the gutter. This keeps the guard from creeping further under the shingle (doesn't fit under enough!) and collapsing into the gutter. I rate "3" because it is better then what industry offers, otherwise I would rate "1".


Gutter Guards
Nov 5, 2016 | john
Review star icon Review star icon Review star icon Review star icon Review star icon
Easy to install, no drilling for screws. If shingles are thick or stiff, use a steel roofing/builders square to lift a section, using the short arm as a lever - and insert guard underneath. Cut into two foot sections for even easier install - but you'll need extra clips.


would definitely buy again
Aug 4, 2016 | Regine Nickel
Review star icon Review star icon Review star icon Review star icon Review star icon
For this price you cannot match this product! It is lightyears ahead of comparable gutter guards. My contractor loved it. I can see that it could be tricky to install on older, bent gutters, but our were newly installed at the same time we installed the guards. The only change we made was not to use the plastic clips. Instead we chose rivets. We also used the gutter guards to cover the venting holes under the soffits. The material cuts easily and the stainless steel staples went through easily as well. No more varmints under the roof.As you can see, we are happy with this product.


Gutter Guards
Jul 12, 2016 | Bryan Curtis
Review star icon Review star icon Review star icon Review star icon Review star icon
I had to return the item because the clips would not fit beneath the lip of my gutter.


Problems with Snow
Feb 16, 2016 | Bob Parker
Review star icon Review star icon Review star icon Review star icon Review star icon
These gutter guards work well, if you have precisely installed them. Where two cross, riveting them together works well. However, in snowy areas, if there is the least bit wrong with the installation, the snow will pull the gutter guard right off the gutter over the winter.


Excellent product value when installed
Nov 15, 2015 | Mike
Review star icon Review star icon Review star icon Review star icon Review star icon
I have had these gutter guards on one of my homes for several years. They were installed by a professional. They perform as expected keeping leaves and sticks out of the gutters. They look as clean and shiny as the day they were installed. I am now installing a hundred feet of the gutterguards on another home. The instructions are fine except for the instalation of the plastic clips. I found this to be quite difficult. There needs to be a video showing clip installation method. What are the best tools to install the clips. It is impossible to install them by simply pressing them into place by hand Through trial and error I found that a pair of channel locks was the only way to get the clips seated properly.I am sure there is a better method but I have no idea what it is.


Read More